|
|
| |
| |
|
PRIMARY, SECONDARY /
DEFECTIVE AND OVER ROLLED MATERIAL |
|
|
|
PRIMARY |
|
These are made as per the ordered quantities. |
|
|
|
SECONDARY / DEFECTIVE |
|
While producing the primary products, it is
common in the mills to have problems in the mills on many
aspects, which could be the chemistry, services, weights,
rusting or any other problem. The OVER ROLLING Mills against an
order, produces some extra material to enable to supply the full
quantity. Hence this surplus quantity left over is termed as
primary over rolling and is sold as stock lot. |
|
|
-
GALVANISED SHEETS / COILS
- PLATES
- END CUTTING
PLATES
- HR/CR ENDS
- HR COILS
- CR COILS /
SHEETS
- PIPES
- SEMIS
- BEAMS &
STRUCTURE
- DEFORMED
BARS
- FERRO
ALLOYS
|
|
|
|
GALVANISED SHEETS
/ COILS |
|
 The
material being traded varies from thickness of 0.15 mm to 4 mm
duly galvanized, as per customer's desired specifications.
This items is also dealt in sheet form as per customer's
specific requirement. |
| |
| |
|
PLATES |
|
 We
are trading in plates from 5 mm thickness to 300 mm thickness
and width from 1000 mm to 4500 mm depending upon the thickness,
width and of desired length and of course the technicality of
rolling the desired sizes are achieved.
The material that we
are trading is procured from mills adhering to any international
specifications, may it be American standard (API), British
Standard. |
|
|
|
|
|
END CUTTING / SIDE SHEARING OF PLATES -
HRC-CRC |
|
Plates while being rolled are bigger than the ordered size.
Hence to achieve the exact ordered size, the metal is doubly
cut, thereby leaving the cuttings in both width and the length.
The same may vary from 500 mm to any length and the width could
be from 200 mm to any. |
|
|
|
|
|
HR/CR ENDS |
|
While
processing the HR the ends are usually discarded. Similarly to
establish the quality in CR, the ends are discarded. The
terminology is known as Head End or tail end, which is a part of
our trading activity. |
| |
| |
| |
| |
|
  |
