|
|
| |
| |
|
PRIMARY, SECONDARY /
DEFECTIVE AND OVER ROLLED MATERIAL |
|
|
| |
|
HR COILS |
|
We trade in the same to suit the requirement
of CR mills, pipe mills and trade. The thickness varies from 1.5
mm to 12 mm and width from 200 mm to 520 mm (narrow width coils)
and upto 2000 mm also.
The above
material can be in sheet form too. This is the special item we
trade in, also known as box coils having thickness upto 50 mm,
in different widths. The normal weight may go upto 25 to 30 MT. |
| |
| |
|
CR COILS / SHEETS |
 The
size range that we trade is from 0.17 mm to 4 mm and width from
200 mm to 1500 mm. The coil width is a combination in thickness
and width and can go upto 28 MT. The same is also dealt in Sheet
form too. |
|
|
| |
|
PIPES |
|
Welded (ERW) |
|
 We
are also engaged in trading of ERW (Electric Resistance Welded)
Steel Pipes, in different thickness as per IS, BS and American
norms as per customer's specification. The size range would be
maximum 500 diameter and thickness as per customers specific
requirements. The same is applied in either black or galvanized
condition.
Seamless
We trade in all
types of seamless pipes, dia. from 65 mm to 600 mm and thickness
as per customer's specification. The general industrial usages
could be scaffolding, water transmission, irrigation, oil
refinery etc. |
|
|
|
|
|
SEMIS |
|
Semi’s are being
traded as per the following categories:
Semi’s are traded in
all international standards for rolling into wires rods,
deformed bars, structure and other usages and alloys as per
customer’s specific needs.
The same is
available from continuous casting routes as follows :
- Billets – Size
100 X 100 mm, 150x150 mm billets.
- Blooms – Size
160 x 160 mm to 900 x 900 mm.
- Round Billets
– Dia. From 140 mm to 400 mm
- Slabs –
Thickness from 70 mm to 300 mm and the width maximum upto 2000
mm and length as per specification.
|
|
| |
|
BEAMS & STRUCTURE |
|
 Are dealt
in international standards from version mills areon the globe.
The size range stands form 100 mm goes upto 900 mm. They are
basically universal beams, I beam. |
|
|
|
|
|
DEFORMED
BARS |
|
The
material is being traded as per desired international standards
in the size 8 mm to 40 mm. |
| |
| |
|
FERRO ALLOYS |
|
 Most commonly traded Ferro Alloys are Ferro
Silicone, Ferro-Chrome, Ferro-Manganese etc . |
| |
| |
|
 |
